The magnetic whiteboard is a common product in office equipment. Its convenience makes it tend to replace the traditional classroom blackboard. The dedicated whiteboard pen used for writing on the magnetic whiteboard, paired with a dedicated whiteboard eraser, can be wiped off very well, and is becoming more and more popular.

When a company purchases a magnetic whiteboard, it will be puzzled: which magnetic whiteboard is good? How about a magnetic tempered laminated glass whiteboard? What are the benefits? Take the magnetic tempered laminated glass whiteboard as an example. The raw materials commonly used in magnetic tempered laminated glass whiteboards are all extraordinary. The product uses explosion-proof tempered laminated glass, writes smoothly, and has neat handwriting. Technology and human nature are integrated; it is not only practical but also safe.

1. When using a magnetic tempered laminated glass whiteboard, remember to tear off the protective film stuck on the surface.

2. You should write with a cost-effective whiteboard pen, otherwise it cannot be wiped off.

3. You should use a soft and clean whiteboard eraser (if dirt adheres to the whiteboard eraser, clean it with tap water, dry it, and then reuse it), otherwise, it is easy to damage the surface when wiping.

4. After a magnetic tempered laminated glass whiteboard is used for a period of time, pen marks or dust accumulating on the surface are normal; at this time, do not immediately wipe the surface with a brush (because there will inevitably be dirt and hard lumps on the towel, which will scratch the surface when wiping), but use whiteboard cleaning solution and a cotton cloth or tissue to wipe. Method: first spray the whiteboard cleaning solution on the surface, then carefully wipe with a soft, clean cotton cloth or lint-free tissue.

5. Usually do not lean other objects against the surface, so as not to bump and damage the surface!

According to the test, the built-in calibration white tile of the colorimeter, after being stained, harms the color measurement database; according to the basic principle, the influencing reasons are elaborated, and daily black and white standard maintenance suggestions are made. Various spectrophotometers have a white calibration plate (white calibration piece), and some will have a standard black trap; this white calibration plate is mostly made of ceramics and is generally called a calibration whiteboard or calibration white tile. If these ceramic fiber plates are accidentally broken, or there is obvious staining, yellowing, etc. on them.